Duplo DB-280 Manual de instrucciones descargar pdf (Pagina 39)

~39~

4.4.5 PADDING MODE:

“PAD” is one of the DB-280 operations that apply to special binding applications such as binding without

cover sheet.

Press “FUNCTION” button to switch to “PAD” operation. The

“PAD” LED will be lit and display flashing "LOAD PAD" as

shown.

Note:

The “NOTCH” LED is normally OFF. But you can press

“NOTCH” button to actuate it, if desired.

(1) Press the “OPEN” button. Be sure to follow the label

instructions on the clamp To load the pad block to the

RIGHT of the red line, then slide the pad block to the far

LEFT of the clamps and you will see the flashing "PUSH

CLOSE" display.

Step 1:

Load book to the

RIGHT of the red line.

Step 2:

Slide the book to

The far LEFT.

(2) Then press the “CLOSE” button to clamp down the pad

block and you will see the flashing "PUSH START" display.

Note:

In case you need to adjust the pad block after you have closed

the clamps, you can press the "OPEN" button twice to release it.

The LED display will show "PUSH CLOSE". After you have

adjusted the pad block, you have to press "CLOSE" button until

the clamps close. Then you will see the flashing "PUSH

START" display again.

(1) Press the “START” button. The LED display of control

panel will show a “Å” sign and the clamp station will move

over the notching station and return to clamp station.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 68 69

Sin comentarios

Duplo DB-280 Manual de instrucciones Pagina 39