Duplo DB-200 Manual de usuario descargar pdf (Pagina 17)

Maintenance

Cleaning Procedures

After you have finished using the binder for the day, follow the following steps:

1. Close the clamps while the LED display flashing "LOAD BOOK" or "LOAD PAD".

2. press "START" and "CLEAR" keys simultaneously. The clamp station will automatically

move to the left of the machine and LED display "NP SVC".

3. Clean the residual glue that might be on the nipping plates and plate surfaces.

4. Press the "START" key, the clamp station will return to its home position. Open the clamps

to the maximum position. Clean their surfaces and wax them.

5. Turn the DB-200 off.

APPENDIX

SETUP FOR TIMERS:

To enter the timer setup menu, you will need to press and hold down both the “OPEN” and

“CLOSE” buttons, then turn the power on. You should see “SET TR” in the LED DISPLAY.

Press the “FUNCTION” button to sequentially display TR1, TR2, TR3, TR4, TR5, TR6,

“SAVE”, “CANCEL”, and “RESET”. Once you have selected the setting to change, you need to

press the “OPEN” to increase the time and the “CLOSE” to decrease the time within their

ranges. Press “FUNCTION” button until you see “SAVE” in the LED DISPLAY. Then press the

“START” button to change it. Or select “CANCEL” and press “START” button to exit. To

return all settings to default, please use “RESET” followed by “START” button to recover the

factory settings.

WARNING: We only recommend you to change TR1.

Below are the default times for each TRx and it’s description:

Name Default Time Range Description

TR1 4 sec. 2.0 - 10 sec. Nipping time.

TR2 1 sec. 0.5 - 5 sec. Auto mode: After loading the cover, the

delay time before clamp station returns.

TR3 2 sec. 1.0 - 5 sec. Auto mode: Clamp closing time

for the book.

TR4 1 sec. 0.5 - 5 sec. Auto mode: Clamp opening

time for the book.

TR5 .5 sec. 0.5 - 5 sec. Auto mode: The clamp detecting time

right after closing.

TR6 5 sec. 3.0 - 10 sec. Padding mode: The closing

time of clamp before opening it.

1 2 ... 12 13 14 15 16 17 18

Sin comentarios

Duplo DB-200 Manual de usuario Pagina 17